51 lines
2.5 KiB
Plaintext
Executable File
51 lines
2.5 KiB
Plaintext
Executable File
Before you start configuring your Windows build system, be aware of our tested configurations:
|
|
Memory: You will need at least 2GB RAM, 4GB strongly recommended.
|
|
CPU: Multiple CPUs are strongly recommended.
|
|
A build can take over an hour.
|
|
Visual Studio 2017/2022 Community Edition.
|
|
|
|
Ensure you can build a stock viewer-development try as described in the SL wiki. Before asking for any help
|
|
compiling Firestorm, make sure you can build the Second Life viewer first. If you try and skip this step, you may
|
|
receive much less help. https://wiki.secondlife.com/wiki/Build_the_Viewer_on_Windows
|
|
|
|
If you want to use licensed FMOD or KDU build libraries (they are optional) you have to provision these yourself.
|
|
If you're licensing these with Phoenix/Firestorm, ask for the libraries for fmod and kdu. Put them into:
|
|
|
|
c:\cygwin\opt\firestorm
|
|
|
|
If you're a community builder, you'll need to build these libraries yourself, then change your autobuild.xml file to
|
|
point to your own versions, or create a different autobuild.xml with your customizations, and use this with autobuild
|
|
instead of our default autobuild.xml There are some examples of how to build FMOD on the LL Wiki and opensource-dev
|
|
mailing list. We've created a non-KDU build target to make this easier. Everywhere you see "ReleaseFS" below, use
|
|
"ReleaseFS_open" instead. This will perform the same build, using OpenJpeg instead of KDU.
|
|
|
|
|
|
To build Firestorm - a more detailed instruction can be found at https://wiki.firestormviewer.org/fs_compiling_firestorm_windows:
|
|
|
|
Open a CMD shell and navigating to your firestorm code repo:
|
|
|
|
autobuild build -A 64 -c ReleaseFS
|
|
|
|
Other build targets you may use are:
|
|
|
|
ReleaseFS (includes KDU, FMOD)
|
|
ReleaseFS_open (no KDU, no FMOD)
|
|
RelWithDebInfoFS_open (no KDU, no FMOD)
|
|
|
|
Other examples:
|
|
autobuild configure -A 64 -c ReleaseFS # basic configuration step, don't build, just configure
|
|
autobuild configure -A 64 -c ReleaseFS -- --clean # clean the output area first, then configure
|
|
autobuild configure -A 64 -c ReleaseFS -- --chan Private-Yourname # configure with a custom channel
|
|
|
|
autobuild build -A 64 -c ReleaseFS --no-configure # default quick rebuild
|
|
|
|
If you want to set custom configuration, do this in the configure step separately from build, then run "autobuild
|
|
build -A 64 -c ReleaseFS --no-configure" as a secondary step.
|
|
|
|
|
|
Logs:
|
|
Look for logs in build-vc1x0-64/logs
|
|
|
|
Output:
|
|
Look for output in build-vc1x0-32/newview/Release
|