55 lines
2.6 KiB
Plaintext
Executable File
55 lines
2.6 KiB
Plaintext
Executable File
Make sure xcode is installed, it's a (sometimes) free download from apple.
|
|
Make sure cmake is installed, use at least a 2.8.x version.
|
|
|
|
If you are using OSX 10.5 or 10.6, Xcode 3 will be used. Output will work on all 10.5 systems and
|
|
higher.
|
|
|
|
If you are using OSX 10.7 (ie, Lion), the build will use Xcode 4 and your output will only work on OSX 10.6 and
|
|
higher.
|
|
|
|
Insure you can build a stock viewer-development try as described in the SL wiki. Before asking for any help
|
|
compiling Firestorm, make sure you can build viewer-development first. If you try and skip this step, you may
|
|
receive much less help. http://wiki.secondlife.com/wiki/Compiling_the_viewer_(Mac_OS_X)
|
|
|
|
If you want to use licensed FMOD or KDU build libraries (they are optional) you have to provision these yourself.
|
|
If you're licensing these with Phoenix/Firestorm, ask for the libraries for fmod and kdu. Put them into:
|
|
/opt/firestorm
|
|
|
|
If you're a community builder, you'll need to build these libraries yourself, then change your autobuild.xml file to
|
|
point to your own versions, or create a different autobuild.xml with your customizations, and use this with autobuild
|
|
instead of our default autobuild.xml There are some examples of how to build FMOD on the LL Wiki and opensource-dev
|
|
mailing list. We've created a non-KDU build target to make this easier. Everywhere you see "ReleaseFS" below, use
|
|
"ReleaseFS_open" instead. This will perform the same build, using openjpeg instead of KDU.
|
|
|
|
Available premade firestorm-specific build targets:
|
|
|
|
ReleaseFS (includes KDU, FMOD)
|
|
ReleaseFS_open (no KDU, no FMOD)
|
|
RelWithDebInfo_open (no KDU, no FMOD)
|
|
|
|
To build firestorm:
|
|
|
|
autobuild build -c ReleaseFS
|
|
|
|
Other examples:
|
|
|
|
autobuild configure -c ReleaseFS # basic configuration step, don't build, just configure
|
|
autobuild configure -c ReleaseFS -- --clean # clean the output area first, then configure
|
|
autobuild configure -c ReleaseFS -- --chan Private-Yourname # configure with a custom channel
|
|
|
|
autobuild build -c ReleaseFS --no-configure # default quick rebuild
|
|
autobuild build -c ReleaseFS --no-configure -- --clean # Clean rebuild
|
|
|
|
Any of the configure options can also be used (and do the same thing) with the build options.
|
|
Typical LL autobuild configure options should also work, as long as they don't duplicate configuration we are
|
|
already doing.
|
|
|
|
|
|
Logs:
|
|
|
|
Look for logs in build-darwin-i386/logs
|
|
|
|
Output:
|
|
|
|
Look for output in build-darwin-i386/newview/Release
|